Create Curtains without Canopy Bed Frame
Traditionally, we canopy bed frame four poster attached by beams between. You will see cloth tied to the frame of the canopy hung in a variety of ways through beams or permanently secured to the frame. Usually made cheap metal or so more expensive wood, canopy frames require tolerance from the ceiling. When you make your own canopy bed without a frame, you open to more possibilities and design options, plus save a lot of money. You can make curtains bed today with little sewing today and sleep overnight in a canopy bed.
Measured from floor to ceiling for the length of your curtain fabric for canopy bed frame. Add about 12 inches (30.48 cm) to allow for seams and adds another 4 inches (10.16 cm) if you want your curtains lie on the floor. Multiply the amount of fabric you need for each curtain.
Choose fabric in a color to match the decor of your bedroom, considering that both sides of the fabric will be. A good idea includes combinable colors with the main color design bedroom or a lighter printed fabric like tulle. Hang the three curtain rods on the ceiling around your canopy bed frame. Sew the fabric panels for curtain, and then let him hemming your curtains.
Measuring the Canopy Bed Frame
A canopy bed frame consists of four tall poles with small rails that are attached to each post. With a framework for canopy in place, a bit of fabric can create a canopy bed. Bear frame instead offers numerous options for hanging fabric. The first thing to decide is how much fabric you want. Choose a long festoon flow only to the head of the bed or curtains bulky for the entire frame.
Measure from the top rail to the floor and record the measurement for canopy bed frame. Add 8 inches (20.32 cm) to the extent that the extra fabric to wrap around the top rail. Add 2 inches (5.08 cm) to the seams. Make of 4-6 inches (10.16 to 15.24 cm) if you want the fabric to pile on the floor. Cut the width of the fabric to suit your tastes. Most is 36 inches wide (91.44 cm), which could create a panel of 34 inches (86.36 cm) wide and 1 inch (2.54 cm) of seams.
Extend the tape measure from the floor to the top rail, according to the railing on the opposite side and down to the ground. Add 2 inches (5.08 cm) for sewing. Make of 8-12 inches (20.32 to 30.48 cm) if you want the fabric to pile up on each side of the canopy bed frame.