Pop Up Trundle Bed Ideas
The pop up trundle bed are nice to have because it does not occupy space, except when in use. They can provide an extra bed for the company overnight. The trundle beds are also great for children’s rooms because they are usually the size of a double bed. You can make your own nest double bed, perfect for slipping under daybeds. This will be easier to use when additional space is needed to sleep.
Measure the bottom of the pop up trundle bed. Measure from the bottom of the bed frame to the ground to make sure you have enough space for a trundle bed before starting the project. Note that the nest will be about 8 inches (20 cm) tall and about 6 feet (183 cm) long. Show the measurements of your mattress just to be sure that the measures of wood deserves. Adjusts measures accordingly if necessary.
Pop up trundle bed use the measuring tape and a pencil to mark the necessary steps in your timber. Take the 4 “x 8” (10 cm x 20 cm) of pine and cut two lengths of 6 feet (183 cm) long for the sides of the nest. Cut the remaining 4 “x 8” (10 cm x 20 cm) between the end pieces of the nest.
Pop Up Trundle Bed Assembly Instructions
Pop up trundle bed is framework that is often used as a bed and conveniently stored under a day bed or bunk. For those who have guests sleeping over occasionally, but do not have the space to set up an extra bed, pop up trundle bed is a space saver. When it is not necessary for a bed, the mattress can be removed from the nest and clothing or other items can be stored there. Identify the parts of the pop up trundle bed.
Adjust the two side rails on the left and right so the screw slots in each lane facing inward. Place the end rails at the top and bottom from the set part of the side rails. Connect the end of the side rails, either with a pin or bolt rails. Use an Allen wrench to tighten the screws.
Place the strips in a line, guided by the width between the side rails. Use the Allen wrench to tighten the slats on the side rails. Place the mattress on the nest after all parts are screwed. Turn the nest so the higher side rail is back to bed. Then push the nest under the bed frame.